Hobre WIM Compas Flex Wobbe Index Analyzer

← Hobre Instruments
Hobre WIM Compas Flex

Measured parameters: Wobbe Index / Calorific Value

WIM Compas Flex is an online analyzer that continuously measures the Wobbe index of natural gas, for gas turbines and distribution lines; from Tetra in Türkiye.

Installation, calibration, spare parts and service in Türkiye come from Tetra; cabinet and panel integration can be done at our İzmir facility.

Technical information

Measured parameter
Wobbe index
Sample pressure
1.5 – 5.0 barg
Supply
230 VAC, 50/60 Hz
Analog output
2 pcs (Wobbe index)
Ambient temperature
5 – 40 °C (standard)
Mounting
Wall-mounted

WIM Compas Flex is an online analyzer developed by Hobre Instruments to continuously measure the Wobbe index of natural gas. The Wobbe index shows a gas's energy delivery capacity at the burner and is a critical parameter for fuel quality control in gas turbines, boilers and heating systems. Analysis follows a continuous measurement principle based on combusting the sample gas within a short time.

The standard version is designed for applications with a sample pressure of 1.5 – 5.0 barg, is wall-mounted and provides two analog Wobbe index outputs. For zero hydrocarbon emission operation, the maximum back pressure is 0.5 barg. Options such as an Ex version, communication protocol, specific gravity meter, sample pressure/flow monitoring and fast loop are added by order code.

WIM Compas Flex features

  • Continuous Wobbe index measurement
  • Sample pressure 1.5 – 5.0 barg
  • Standard ambient temperature 5 – 40 °C
  • Wall-mounted, 230 VAC
  • Zero HC emission (maximum back pressure 0.5 barg)
  • Options: Ex version, communication protocol, specific gravity meter, isolated relay, fast loop

Spare parts and consumables

Write to us for spare parts and consumables; the Tetra service team supplies and replaces the right original parts for your instrument.

Ask about spare parts →
CONTACT

Let's choose the right product together

Tell us about your application; we will recommend the right model and configuration for the measuring point, process conditions and regulations.