Contact Us

SENTRY MCL, MLG and MFV Manual Liquid Samplers

← SENTRY Equipment
SENTRY MCL / MLG / MFV

SENTRY MCL, MLG and MFV manual samplers safely collect process liquid and liquefied gas samples. Sold and serviced in Türkiye by Tetra.

Request a quote → SENTRY Equipment product page ↗

Installation, calibration, spare parts and service in Türkiye come from Tetra; cabinet and panel integration can be done at our İzmir facility.

Technical information

Models
MCL, MLG, MFV
MCL cylinder
500 cc, with dip tube
MFV fixed volume
300 cc
MCL in-line filter
140 µm
MLG minimum temperature
-12 °C

SENTRY MCL (manual liquid), MLG (liquefied gas cylinder) and MFV (fixed volume) samplers take representative samples from process liquids in a closed system with regard for operator safety. They are used for laboratory analysis samples at refinery, petrochemical, chemical and LPG plants. The panel carries isolation valves, pressure gauges and a sequential switching valve.

MCL can be configured with a 500 cc sample cylinder, dip tube and 140 µm in-line filter; MFV with a 300 cc fixed-volume cylinder, 1,000 cc Schott bottle and nitrogen purge kit (e.g. for NaOH samples). MLG provides cylinder sampling for liquefied gas.

MCL / MLG / MFV features

  • MCL: 1800 psig @ 100 °F, 1230 psig @ 300 °F; 500 cc cylinder, 140 µm in-line filter
  • MFV: 300 cc fixed-volume cylinder, 1,000 cc Schott bottle, nitrogen purge kit, FFKM O-ring
  • MLG: 1/4" compression fitting, minimum temperature -12 °C, 1800 psig @ 100 °F
  • 316 stainless steel wetted parts, Teflon seal; 304 stainless steel backplate
  • MTR material certificates, CE and ATEX / PED documents

If you state the type of sample liquid and its pressure and temperature, Tetra will configure the suitable model.

Spare parts and consumables

Write to us for spare parts and consumables; the Tetra service team supplies and replaces the right original parts for your instrument.

Ask about spare parts →

Products from SENTRY Equipment

SENTRY SENTRY MCG Manual Gas Sampler (Sample Station) The SENTRY MCG manual gas sampler is used to take cylinder samples from process gas. Sold, installed and serviced in Türkiye by Tetra. View → SENTRY SENTRY Cobra HTHV High-Temperature and Viscosity Sample System SENTRY Cobra HTHV provides safe closed sampling from high-temperature and viscous process liquids. Sold and serviced in Türkiye by Tetra. View → SENTRY SENTRY Isolok SAB Automatic Sampler SENTRY Isolok SAB takes fixed-volume samples from thick liquid and slurry flows in pipelines. Sold, installed and serviced in Türkiye by Tetra. View → SENTRY SENTRY SBC Controller and Sequencer 5 Sampler Control SENTRY SBC PLC controller and Sequencer 5 sampler control units operate Isolok and SENTRY samplers. Sold and serviced in Türkiye by Tetra. View → SENTRY SENTRY MVD, MVS and MBP Valved Manual Samplers SENTRY MVD, MVS and MBP bottle-type manual samplers take samples from process liquid in a closed system. Sold and serviced in Türkiye by Tetra. View → SENTRY SENTRY Isolok SAA, SAH, SAK and SAL Samplers SENTRY Isolok SAA, SAH, SAK and SAL series automatic samplers take samples from powder, granules and slurry. Sold and serviced in Türkiye by Tetra. View →
CONTACT

Let's choose the right product together

Tell us about your application; we will recommend the right model and configuration for the measuring point, process conditions and regulations.

Request a Quote →