Contact Us

M&C ECM Series Compressor Gas Sample Cooler

← M&C TechGroup
M&C ECM

M&C ECM series compressor gas coolers dry sample gas for CEMS and process analyzers. Sold and serviced in Türkiye by Tetra.

Request a quote → M&C TechGroup product page ↗

Installation, calibration, spare parts and service in Türkiye come from Tetra; cabinet and panel integration can be done at our İzmir facility.

Technical information

Series
ECM-1, ECM-2, ECM-Ex2 (parts compatible with ECP / ECC exchangers)
Exchanger material
Duran glass, stainless steel, PVDF (option)
Supply voltage
240 V or 120 V, 50-60 Hz
Connections
Sample gas GL 18-6 mm, condensate GL 25-12 mm

The M&C ECM series are compressor gas coolers that lower the dew point of sample gas on flue gas measurement (CEMS) and process gas analysis lines. Separating moisture as condensate before it reaches the analyzer protects the analyzer cell and allows measurement on a dry gas basis. They are used with a heated probe and heated line in applications such as thermal power plants, cement and chemical plants, waste incineration and refineries.

The series covers ECM-1 (one exchanger), ECM-2 (two exchangers) and ECM-Ex2 models for Zone 2 hazardous areas. Jet-stream exchangers shared with the family's ECP and ECC type coolers (with material options such as Duran glass, stainless steel and PVDF) and components such as the fan, temperature controller and PT100 sensor are offered as separate items.

ECM features

  • On the ECM-1 data sheet: 1 jet-stream exchanger, maximum gas flow 250 Nl/h, outlet dew point stability better than ±0.1 °C under constant conditions
  • ECM-1 total cooling capacity 144 kJ/h at +10 to 50 °C ambient temperature; ambient temperature up to +50 °C
  • ECM-2: ready for two jet-stream exchangers (150 Nl/h each), outlet dew point factory-set to +5 °C, high/low temperature alarm and digital thermometer
  • Configurable status alarm contact; compact wall-mounted housing
  • Optional peristaltic drain pump (SR25.2) and different gas/condensate connections depending on exchanger type (GL 18-6 mm, GL 25-12 mm)
  • ECM-Ex2 (single or dual channel) applications for Zone 2

For your single- or multi-channel application, simply share the sample flow, ambient condition and hazardous area requirement; Tetra will select the suitable exchanger and pump.

Spare parts and consumables

Write to us for spare parts and consumables; the Tetra service team supplies and replaces the right original parts for your instrument.

Ask about spare parts →

Products from M&C TechGroup

M&C M&C SR25 Peristaltic Condensate Pump M&C SR25 peristaltic pumps continuously drain condensate that collects in gas coolers. Sold, installed and serviced in Türkiye by Tetra. View → M&C M&C SP Series Heated Gas Sample Probe M&C SP2000-H and SP2100-H heated sample probes filter flue gas and carry it to the analysis line. Sold, installed and serviced in Türkiye by Tetra. View → M&C M&C LA Liquid Sensor and ADS Condensate Drain The M&C LA1S liquid sensor and ADS-SS condensate drain detect liquid entering the sample line and drain it. Sold and serviced in Türkiye by Tetra. View → M&C M&C FT, FS, FSS and FP Sample Gas Filters M&C FT, FS, FSS and FP series gas filters retain dust and particles on the sample line. Sales and filter element supply in Türkiye by Tetra. View → M&C M&C CLF-5 Liquid Particle Filter The M&C CLF-5 liquid particle filter separates microscopic liquid droplets in sample gas. Sales and filter element supply in Türkiye by Tetra. View → M&C M&C N Series Diaphragm Gas Sample Pump M&C N3, N5 and N9 diaphragm pumps draw sample gas on gas analysis lines. Sales, spare parts and service in Türkiye by Tetra. View →
CONTACT

Let's choose the right product together

Tell us about your application; we will recommend the right model and configuration for the measuring point, process conditions and regulations.

Request a Quote →