Mega System Artik Air Flue Gas Conditioning Unit

Artik Air is designed to condition samples taken from emission sources before they go to combustion gas analyzers. It uses two-stage pre-condensation: first compressor cooling, then cooling with a Peltier cell. A borosilicate heat exchanger shortens the sample gas's contact time with condensate, limiting the loss of soluble volatile components such as SO2.

• High-capacity compressor; dew point shown on the display.
• Cooling capacity above 500 W (Tc 40 °C, Te 10 °C); a further 50 W is added with the Peltier.
• Operating conditions 0-45 °C and 95 percent relative humidity.
• 400 x 415 x 193 mm; 15 kg (17 kg with Peltier), portable and ergonomic.
• 230 VAC, 50 Hz supply.

Artik XP can be used for a liquid circuit kept at constant temperature.

Because water condensing during the cooling stages is quickly separated, the analyzer receives a dry, clean sample. This design is intended to reduce systematic low readings in the measurement of sulfur dioxide and similar water-soluble components.

Tetra configures Artik Air together with the analyzer in portable flue gas measurement sets. Condensate vessel cleaning, compressor checks and dew point verification are carried out as part of regular service.