SENTRY Isolok SAE Automatic Solids Sampler

Isolok SAE is an automatic solids sampler that captures a fixed amount of product at set intervals with an air-operated four-inch stroke cylinder. The captured sample drops by gravity into the sample container. The aim is to take samples representing the whole process without breaking or crushing the product; it suits thick-walled vessels and pipes.

• Takes 90 or 100 cc of sample per cycle.
• Used up to a maximum particle size of 19 mm.
• Process pressure up to 13.37 bar depending on the application; higher pressure reviewed on request.
• Sample temperature from -40 to 302 °C; the limit varies according to seal material and duty cycle.
• A 3-inch tri-clamp connection makes installation and maintenance easy.

The same manufacturer's Isolok SAH model and RPG, PR and RX solids samplers meet different particle size and mounting needs. Controllers such as Pro-Tec and SBC are used for control.

Tetra determines SAE's mounting point and seal material according to product temperature and installs the air and controller connections. The seal replacement interval, which depends on the number of cycles, is tracked through maintenance records, and seals are supplied through Tetra.