Contact Us

Synspec LSE N2O-4405 Nitrous Oxide Analyzer

← Synspec
Synspec LSE N2O-4405

LSE N2O-4405 is an analyzer that measures nitrous oxide (N2O) at ppb level by laser photoacoustics, for ambient air and stacks; offered in Türkiye by Tetra.

Request a quote → Synspec product page ↗

Installation, calibration, spare parts and service in Türkiye come from Tetra; cabinet and panel integration can be done at our İzmir facility.

Technical information

Measured gas
Nitrous oxide (N2O)
Measurement principle
Laser-based photoacoustic detection
Measurement range
0-15 ppm, higher on request
Time resolution
120 s

LSE N2O-4405 is an analyzer that measures nitrous oxide (N2O) with a laser-based photoacoustic detector. It is used in ambient air monitoring and stack (emission) measurements. It reaches a detection limit below 1 ppbv within a few minutes; the range is 0-15 ppm and can be set higher on request.

LSE N2O-4405 features

  • Detection limit below 1 ppbv
  • Noise 0.005 ppm (1σ, 120 s)
  • Precision: 0.005 ppm or 2% of the measured value, whichever is greater
  • Response time (T10-90) shorter than 2 minutes
  • Sample flow 80 ml/min

Spare parts and consumables

Write to us for spare parts and consumables; the Tetra service team supplies and replaces the right original parts for your instrument.

Ask about spare parts →

Products from Synspec

Synspec Synspec Nitrogen Generator and FID/GC/PID Gas Stations Synspec nitrogen generators supply GC and FID/PID analyzers with 99.999% pure nitrogen, eliminating the need for cylinders. From Tetra in Türkiye. View → Synspec Synspec LSE NH3-1700 Ammonia Analyzer LSE NH3-1700 is an online analyzer that continuously measures ammonia in air and barns over a 0-15 ppm range; offered in Türkiye by Tetra. View → Synspec Synspec Alpha Series FID/PID Benzene, Methane and VOC Analyzers Synspec Alpha analyzers measure methane/NMHC by FID and benzene, butadiene and vinyl chloride by PID in ambient air; from Tetra in Türkiye. View → Synspec Synspec GC955 Ambient Air BTEX, VOC and Benzene Gas Chromatograph Synspec GC955 is a gas chromatograph that continuously measures benzene, BTEX, butadiene, vinyl chloride and methane/NMHC in ambient air; from Tetra in Türkiye. View → Synspec Synspec GC955 810 Mercaptan Gas Chromatograph GC955 810 is a gas chromatograph that measures mercaptans and sulfides in air using cooled pre-concentration and PID; offered in Türkiye by Tetra. View → Synspec Synspec GC955 118 Methane and TNMHC Gas Chromatograph GC955 118 is a gas chromatograph that separately measures methane and total non-methane hydrocarbons by FID; offered in Türkiye by Tetra. View →
CONTACT

Let's choose the right product together

Tell us about your application; we will recommend the right model and configuration for the measuring point, process conditions and regulations.

Request a Quote →