Contact Us

Galvanic ViscoSite Process Viscometer (VL800 Viscoliner)

← Galvanic Applied Sciences
Galvanic Applied Sciences ViscoSite

Measured parameters: Viscosity

ViscoSite is a continuous process viscometer flange-mounted on the pipeline, with IP66 enclosure and Zone 2 option. Discontinued by the manufacturer; support for existing systems continues.

Discontinued The manufacturer no longer sells this model; Tetra continues to provide service, calibration and spare parts for installed units.

Request a quote → Galvanic Applied Sciences product page ↗

Installation, calibration, spare parts and service in Türkiye come from Tetra; cabinet and panel integration can be done at our İzmir facility.

Technical information

Sensor
VL800 Viscoliner (cylindrical tip)
Material
316 stainless steel
Calibration range
50 – 10.000 cP
Process temperature
Below 200 °C
Connection
2-inch ANSI 150 lb flange
Supply
95–265 VAC, 50/60 Hz, 15 W
Enclosure
IP66 / NEMA 4X

ViscoSite is a process viscometer that continuously measures fluid viscosity on a pipeline. The VL800 Viscoliner sensor connects to the line with a 2-inch 150 lb ANSI flange, has a 316 stainless steel body and measures the viscosity effect of the fluid with a cylindrical sensor tip. The calibration range is configured as 50 – 10,000 cP.

One version has an IP66, NEMA 4X fiberglass wall-mounted enclosure for general-purpose areas; the other has an N-VS7000 stainless steel NEMA 4X enclosure for Class 1 Div/Zone 2 areas. It is configured for applications with a process temperature below 200 °C. It is suitable for viscosity control and blending in refinery and chemical processes.

ViscoSite features

  • Continuous in-line viscosity measurement
  • 316 stainless steel, 2-inch ANSI 150 lb flange
  • Calibration range 50 – 10,000 cP
  • General-purpose and Class 1 Div/Zone 2 enclosure options
  • 95–265 VAC supply
  • 10-meter cable and military-type waterproof connector

Spare parts and consumables

Write to us for spare parts and consumables; the Tetra service team supplies and replaces the right original parts for your instrument.

Ask about spare parts →

Products from Galvanic Applied Sciences

Galvanic Applied Sciences Galvanic AccuSeries LPA Potentiometric Wet Chemistry Analyzer AccuSeries LPA measures parameters such as sulfide in water online by ion-selective electrode (ISE); multi-stream design, from Tetra in Türkiye. View → Galvanic Applied Sciences Galvanic FPA4100 Process Photometer (ATEX/IECEx) FPA4100 is a fiber-optic gas and liquid process photometer, offered in Türkiye by Tetra in ATEX/IECEx and CSA versions. View → Galvanic Applied Sciences Galvanic Brimstone 943 H2S/SO2 Tail Gas Analyzer (ATEX) Brimstone 943 controls air demand by measuring H2S and SO2 in sulfur recovery unit tail gas. Sold and serviced in Türkiye by Tetra. View → Galvanic Applied Sciences Galvanic ProTech 903 Tape-Based H2S and Total Sulfur Analyzer ProTech 903 is an ATEX/IECEx analyzer that measures sub-ppm H2S and total sulfur by the lead acetate tape method; sold and serviced in Türkiye by Tetra. View → Galvanic Applied Sciences Galvanic ProTech 1000 Z2 Tape-Based H2S Analyzer ProTech 1000 Z2 is a Zone 2 analyzer that measures H2S and total sulfur in natural gas by a tape-based method; sold and serviced in Türkiye by Tetra. View → Galvanic Applied Sciences Galvanic AccuLase-GPA TDL H2S, CO2, H2O Analyzer AccuLase-GPA is a TDL analyzer that measures H2S, CO2 and H2O in a single measurement cell, for natural gas and refineries; offered in Türkiye by Tetra. View →
CONTACT

Let's choose the right product together

Tell us about your application; we will recommend the right model and configuration for the measuring point, process conditions and regulations.

Request a Quote →