Contact Us

M&C GenTwo V2.4 Multi-Gas Analyzer

← M&C TechGroup
M&C GenTwo V2.4

Measured parameters: CO (Carbon Monoxide), CO₂ (Carbon Dioxide), O₂ (Oxygen, Gas)

Measurement method: Paramagnetic Oxygen, NDIR / GFC, Electrochemical Sensor

M&C GenTwo V2.4 is a multi-gas analyzer with a modular sensor design that measures O2, CO2, CO, CH4 and other gases; from Tetra in Türkiye.

Request a quote → M&C TechGroup product page ↗

Installation, calibration, spare parts and service in Türkiye come from Tetra; cabinet and panel integration can be done at our İzmir facility.

Technical information

Measurement principles
NDIR, paramagnetic, electrochemical, thermal conductivity (WLD)
Measurement ranges
4 ranges per measurement, two adjustable
Relay outputs
4 per measurement signal
Enclosure protection
Rack IP20, wall-mounted IP54
Sample gas flow
25–60 Nl/h

GenTwo V2.4 is a modular multi-gas analyzer that can measure several components from the same sample stream. It is used in combustion control, process optimization, inerting monitoring and environmental protection applications. Which sensors are fitted is determined by the gases to be measured.

Sensor options and hardware

  • NDIR photometer: for polyatomic gases; up to three gases can be measured from a single bench.
  • Paramagnetic oxygen sensor: uses the paramagnetic property of oxygen and has no wearing parts.
  • Can be combined with electrochemical and thermal conductivity (WLD) sensors.
  • Modular design with up to six sensors, 7-inch touchscreen, 0/4-20 mA outputs and Modbus communication over Ethernet.
  • Four measurement ranges per measurement, two freely adjustable; four relay outputs.
  • 19-inch rack (IP20) or wall-mounted (IP54) housing; gas path selectable in Viton, PTFE or stainless steel.

Choosing GenTwo V2.4

Sample flow is in the range of 25-60 Nl/h, and pressure compensation is applied in the range of 0.8-1.2 bar absolute. When selecting, how many gases will be measured on one bench, whether oxygen will be paramagnetic or electrochemical and whether the housing will be rack or wall type are determined together.

Tetra arranges the sensor combination according to your measurement task and can integrate the analyzer into a cabinet or panel in İzmir. On site, zero-span calibration, sensor replacement and gas path checks are carried out in place.

Spare parts and consumables

Write to us for spare parts and consumables; the Tetra service team supplies and replaces the right original parts for your instrument.

Ask about spare parts →

Products from M&C TechGroup

M&C M&C PMA Series Paramagnetic Oxygen Analyzer M&C PMA10, PMA20 and PMA30 oxygen analyzers measure O₂ in flue and process gas. Sales, calibration and service in Türkiye by Tetra. View → M&C M&C ECM Series Compressor Gas Sample Cooler M&C ECM series compressor gas coolers dry sample gas for CEMS and process analyzers. Sold and serviced in Türkiye by Tetra. View → M&C M&C SR25 Peristaltic Condensate Pump M&C SR25 peristaltic pumps continuously drain condensate that collects in gas coolers. Sold, installed and serviced in Türkiye by Tetra. View → M&C M&C SP Series Heated Gas Sample Probe M&C SP2000-H and SP2100-H heated sample probes filter flue gas and carry it to the analysis line. Sold, installed and serviced in Türkiye by Tetra. View → M&C M&C LA Liquid Sensor and ADS Condensate Drain The M&C LA1S liquid sensor and ADS-SS condensate drain detect liquid entering the sample line and drain it. Sold and serviced in Türkiye by Tetra. View → M&C M&C FT, FS, FSS and FP Sample Gas Filters M&C FT, FS, FSS and FP series gas filters retain dust and particles on the sample line. Sales and filter element supply in Türkiye by Tetra. View →
CONTACT

Let's choose the right product together

Tell us about your application; we will recommend the right model and configuration for the measuring point, process conditions and regulations.

Request a Quote →