Contact Us

M&C SP180-H Heated Gas Sample Probe

← M&C TechGroup
M&C SP180-H

M&C SP180-H is an electrically heated compact probe that takes samples from stack and process gas; sold and serviced in Türkiye by Tetra.

Request a quote → M&C TechGroup product page ↗

Installation, calibration, spare parts and service in Türkiye come from Tetra; cabinet and panel integration can be done at our İzmir facility.

Technical information

Sample outlet connection
1/4 inch NPT female, Swagelok for 6 mm tube
Mounting flange
DN 65 PN 6, Form B, 316Ti stainless steel
Weight
Approximately 7.5 kg
Sample-wetted material (EX1)
316 / 316Ti stainless steel, FPM, ceramic
Certificate (MA version)
DNV type approval

SP180-H is a compact gas sample probe using self-regulating electric heating to prevent clogging from condensation and dust buildup. In emission monitoring setups, it is the first element taking gas from the process or stack, followed by a heated line and gas conditioning.

Technical details

  • The filter housing and mounting flange are heated to a maximum of 180 °C; an alarm contact activates if temperature falls below 160 °C.
  • The ceramic filter element and filter volume of approximately 70 ml provide a fast response.
  • EN 14181 compliant test gas connection is standard; calibration gas can be supplied through the filter.
  • The insulated cover allows outdoor mounting.
  • Flange DN 65 PN 6, 316Ti stainless steel; sample-wetted materials are 316/316Ti, FKM and ceramic.
  • There are EX1/EX2 (T2, T3, T4) variants for explosive atmospheres and a DNV-approved SP180-H/MA for marine applications.

Choosing SP180-H

According to the manufacturer's manual, it can be used at a sample temperature up to 600 °C, pressure up to 0.4-6 bar absolute and ambient temperature from -25 to +80 °C; a dust load below 1 g/m³ is recommended. Supply is 110-240 VAC and protection IP54; values on the current data sheet should be taken as definitive.

Tetra selects the probe length and Ex variant according to site conditions, and connects the flange mounting and test gas line. Replacement of ceramic filter elements and periodic inspection of heating control are included in the service plan.

Spare parts and consumables

Write to us for spare parts and consumables; the Tetra service team supplies and replaces the right original parts for your instrument.

Ask about spare parts →

Products from M&C TechGroup

M&C M&C ECM Series Compressor Gas Sample Cooler M&C ECM series compressor gas coolers dry sample gas for CEMS and process analyzers. Sold and serviced in Türkiye by Tetra. View → M&C M&C SR25 Peristaltic Condensate Pump M&C SR25 peristaltic pumps continuously drain condensate that collects in gas coolers. Sold, installed and serviced in Türkiye by Tetra. View → M&C M&C SP Series Heated Gas Sample Probe M&C SP2000-H and SP2100-H heated sample probes filter flue gas and carry it to the analysis line. Sold, installed and serviced in Türkiye by Tetra. View → M&C M&C LA Liquid Sensor and ADS Condensate Drain The M&C LA1S liquid sensor and ADS-SS condensate drain detect liquid entering the sample line and drain it. Sold and serviced in Türkiye by Tetra. View → M&C M&C FT, FS, FSS and FP Sample Gas Filters M&C FT, FS, FSS and FP series gas filters retain dust and particles on the sample line. Sales and filter element supply in Türkiye by Tetra. View → M&C M&C CLF-5 Liquid Particle Filter The M&C CLF-5 liquid particle filter separates microscopic liquid droplets in sample gas. Sales and filter element supply in Türkiye by Tetra. View →
CONTACT

Let's choose the right product together

Tell us about your application; we will recommend the right model and configuration for the measuring point, process conditions and regulations.

Request a Quote →