Contact Us

NEO Monitors LaserGas III Ultra Laser CO / CH4 Analyzer

← Neo Monitors
NEO Monitors LaserGas III Ultra

Measured parameters: CO (Carbon Monoxide), CH₄ (Methane)

Measurement method: TDLAS Laser Absorption

LaserGas III Ultra is an in-situ TDLAS analyzer designed for long optical paths and high concentrations, measuring CO and CO+CH4; offered in Türkiye by Tetra.

Request a quote → Neo Monitors product page ↗

Installation, calibration, spare parts and service in Türkiye come from Tetra; cabinet and panel integration can be done at our İzmir facility.

Technical information

Measurement principle
TDLAS, in-situ measurement
Measured gases
CO; CO + CH4
Certificates
IECEx/ATEX/UKEx Zone 1, CSA Class I Div 2 B,C,D, IEC 61508 SIL2 capability
Communication
Ethernet

LaserGas III Ultra is a tunable diode laser (TDLAS) analyzer that combines process control and process safety in one analyzer and measures directly on the process pipe or stack. It is offered for CO and for combined CO and CH4 measurement. It is used to monitor combustion efficiency and safety at combustion, boiler, furnace, refinery, power, chemical, petrochemical and steel plants. Because it needs no sampling or conditioning, response time is short.

LaserGas III Ultra features

  • Baseline-independent measurement suited to long optical paths and high concentration ranges
  • Real-time, in-situ measurement
  • Proprietary IROSS signal processing technology
  • Ex-d protected design; IECEx/ATEX/UKEx Zone 1 and CSA Class I Div 2
  • IEC 61508 SIL2 capability
  • Ethernet connection

Spare parts and consumables

Write to us for spare parts and consumables; the Tetra service team supplies and replaces the right original parts for your instrument.

Ask about spare parts →

Products from Neo Monitors

NEO Monitors NEO Monitors LaserGas II HF, HCl, NH3 and HCN Laser Analyzers Monitor HF, HCl, NH3 and HCN gases by in-situ laser measurement with LaserGas II; for cement, waste incineration and chemical plants, from Tetra in Türkiye. View → NEO Monitors NEO Monitors LaserGas II SP Laser Gas Analyzer (TDLAS) LaserGas II SP is an in-situ TDLAS laser analyzer for O2, CO, CO2, H2O and CH4. Sold, installed and serviced in Türkiye by Tetra. View → NEO Monitors NEO Monitors LaserGas II MP Cabinet Laser Gas Analyzer LaserGas II MP, with its multi-pass optical cell and cabinet, measures O2, CO, CO2, CH4 and NH3 at ppm level. Sold and serviced in Türkiye by Tetra. View → NEO Monitors NEO Monitors LaserGas iQ2 O2, CO, CH4, H2O Laser Analyzer LaserGas iQ2 is an ATEX-approved TDLAS analyzer that simultaneously measures O2, CO, CH4 and H2O in process gas up to 1300 °C; from Tetra in Türkiye. View → NEO Monitors NEO Monitors LaserGas Q NO and NO2 Laser Analyzer LaserGas Q monitors NO and NO2 gases by in-situ laser measurement, for emission and process applications; from Tetra in Türkiye. View → NEO Monitors NEO Monitors LaserGas II SP Compact Laser Gas Analyzer LaserGas II SP Compact is a compact TDLAS analyzer measuring O2, CO and CO2 for small-diameter ducts and short optical paths; sold and serviced by Tetra. View →
CONTACT

Let's choose the right product together

Tell us about your application; we will recommend the right model and configuration for the measuring point, process conditions and regulations.

Request a Quote →