Contact Us

SENTRY SBC Controller and Sequencer 5 Sampler Control

← SENTRY Equipment
SENTRY SBC / Sequencer 5

SENTRY SBC PLC controller and Sequencer 5 sampler control units operate Isolok and SENTRY samplers. Sold and serviced in Türkiye by Tetra.

Request a quote → SENTRY Equipment product page ↗

Installation, calibration, spare parts and service in Türkiye come from Tetra; cabinet and panel integration can be done at our İzmir facility.

Technical information

Models
SBC controller, Sequencer 5, MPC-2
SBC supply
220-240 VAC, 50 Hz, single phase
SBC box
NEMA 4X, CE
SBC ambient temperature
0 to 50 °C

SENTRY SBC is a PLC-based control unit that manages the operating cycle of Isolok and SENTRY pneumatic/electromechanical automatic samplers. Sampling interval, count and operating sequence are programmed with this unit. Sequencer 5 is a separate product offered for sampler sequencing control, with a panel-mounted box option. MPC-2 is a manual pneumatic lever control unit.

The SBC controller is used on Isolok samplers (e.g. SAB) and the RX sampler; it is ordered together with spare items such as a programmed SD card (SENQA05).

SBC / Sequencer 5 features

  • PLC-based automatic control; NEMA 4X dust- and water-tight non-metallic enclosure
  • 220-240 VAC / 50 Hz single phase; CE marked
  • Ambient temperature 0 to 50 °C (as listed on the data sheet)
  • User manual in PDF; not ATEX-rated, mounted in a safe area
  • Sequencer 5: panel-mounted box option; MPC-2 manual pneumatic lever

If you state the sampler model you use, Tetra will provide the compatible control unit and program.

Spare parts and consumables

Write to us for spare parts and consumables; the Tetra service team supplies and replaces the right original parts for your instrument.

Ask about spare parts →

Products from SENTRY Equipment

SENTRY SENTRY MCG Manual Gas Sampler (Sample Station) The SENTRY MCG manual gas sampler is used to take cylinder samples from process gas. Sold, installed and serviced in Türkiye by Tetra. View → SENTRY SENTRY Cobra HTHV High-Temperature and Viscosity Sample System SENTRY Cobra HTHV provides safe closed sampling from high-temperature and viscous process liquids. Sold and serviced in Türkiye by Tetra. View → SENTRY SENTRY Isolok SAB Automatic Sampler SENTRY Isolok SAB takes fixed-volume samples from thick liquid and slurry flows in pipelines. Sold, installed and serviced in Türkiye by Tetra. View → SENTRY SENTRY MCL, MLG and MFV Manual Liquid Samplers SENTRY MCL, MLG and MFV manual samplers safely collect process liquid and liquefied gas samples. Sold and serviced in Türkiye by Tetra. View → SENTRY SENTRY MVD, MVS and MBP Valved Manual Samplers SENTRY MVD, MVS and MBP bottle-type manual samplers take samples from process liquid in a closed system. Sold and serviced in Türkiye by Tetra. View → SENTRY SENTRY Isolok SAA, SAH, SAK and SAL Samplers SENTRY Isolok SAA, SAH, SAK and SAL series automatic samplers take samples from powder, granules and slurry. Sold and serviced in Türkiye by Tetra. View →
CONTACT

Let's choose the right product together

Tell us about your application; we will recommend the right model and configuration for the measuring point, process conditions and regulations.

Request a Quote →